1. DL manuals
  2. Zenith
  3. Stereo System
  4. LX-140
  5. Installation / Operating Manual | Warranty

Zenith LX-140 Installation / Operating Manual | Warranty

Manual is about: Micro Hi-Fi System

Summary of LX-140

  • Page 2

    Safety precautions 2 this lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The excl...

  • Page 3

    Introduction 3 important safety instructions 1. Read these instructions. - all these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - the safety, operating and use instructions should be retained for future refer- ence. 3. Heed all warn...

  • Page 4

    Table of contents 4 introduction safety precautions . . . . . . . . . . . . . . . . . . . . . .2 important safety instructions . . . . . .3 table of contents . . . . . . . . . . . . . . . . . . . . . . . 4 before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 safety precautions . . ...

  • Page 5

    Introduction before use 5 safety precautions handling the unit when shipping the unit the original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To keep the surface clean do not use volatile liquids, such as ...

  • Page 6

    Front panel/rear panel 6 1. Cd door 2. Display 3. Power indicator 4. Power (standby/on) button 5. Remote control sensor 6. • cd play/pause (cd / ) button • tuning ( ) buttons - tuner • cd skip/search ( / ) buttons • preset ( ) buttons 7. Headphone socket (phones): 3.5mm 8. Cassette holder 9. • recor...

  • Page 7

    Introduction 7 remote control 1. Power button 2. Preset ( ) button 3. Equalizer pattern (eq patt.) button 4. Cd function buttons • cd play/ pause ( ) button • cd stop( ) button • cd skip/search ( / ) buttons • repeat button 5. Xdss button 6. Program button 7. Sleep button 8. Volume control ( ) butto...

  • Page 8

    Connections 8 speaker system connection connect the speaker cords to the speaker terminals. R l otes • be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base. • if you use front spe...

  • Page 9

    Before opera tion 9 11 press clock. (if the clock requires setting, press and hold clock for more than 2 seconds.) - the hours begin to flash. 22 select a 12 hour cycle or 24 hour cycle by pressing tuning ( ) on the front panel. 33 press set to confirm the selected hour cycle. 44 use tuning ( ) butt...

  • Page 10

    Timer function 10 with the timer function you can have the radio reception and recording, cd play, auxiliary source play and record- ing turned on and off at the time desired. 11 press clock to check the current time. For your reference if you don’t set clock, timer function doesn’t work. 22 press t...

  • Page 11

    Opera tion 11 presetting the radio stations you can preset 50 stations for fm and am. Before tuning, make sure that you have turned down the volume to the minimum. 11 press tuner/band to select the fm or am you want in the display window. Every time you press tuner/band, fm and am changes alternatel...

  • Page 12

    12 tape playback basic playback 11 press function repeatedly to appear tape indicator. 22 open cassette deck by pushing stop/eject ( / ) button. 33 insert a cassette with the tape side to the bottom and then close deck. 44 press play ( ). To stop play press stop/eject ( / ) during playback. To pause...

  • Page 13

    Opera tion 13 cd playback basic playback 11 press function repeatedly to appear cd indicator. If no disc is loaded then “no disc” is displayed. 22 press cd open/close ( open/ close) and place the disc into the disc tray. Ote to load an 8cm(3 inch) disc, put it onto the inner circle of the tray. 33 p...

  • Page 14

    14 troubleshooting check the following guide for the possible cause of a problem before contacting service. Symptom no power. No sound. The unit does not start playback. The remote control does not work properly. Cause • the power cord is disconnected. • the audio cables are not connected securely. ...

  • Page 15

    Reference 15 specifications [general] [cd] [t uner] am fm (mw) [amp] [speakers] [t ape ] power supply refer to the back panel of the unit. Power consumption 20w mass 6.6 ib external dimensions (wxhxd) 5.74 x 9.21 x 9.88 inch frequency response 40 - 18000 hz signal-to-noise ratio 60 db dynamic range ...

  • Page 16

    Zenith will repair or replace your product, at zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“warranty period”) listed below, effective from the date (“date of installation”) of original consumer purchase of the product. This w...